Dell OptiPlex 7070 Tower Service Manual - Page 68
System power [2], Hard drive data and optical drive data [4]
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4. Route all the cables through the routing clips. 5. Align the cables with the pins on connectors on the system board and connect the following cables to the system board: a. SATA [1] b. System power [2] c. Speaker [3] d. Hard drive data and optical drive data [4] e. CPU power [5] 68 Removing and installing components
4.
Route all the cables through the routing clips.
5.
Align the cables with the pins on connectors on the system board and connect the following cables to the system board:
a.
SATA [1]
b.
System power [2]
c.
Speaker [3]
d.
Hard drive data and optical drive data [4]
e.
CPU power [5]
68
Removing and installing components