Dell OptiPlex 7070 Tower Service Manual - Page 27
-inch hard drive assembly, Removing the 2.5–inch hard drive assembly, Installing the 2.5-inch
View all Dell OptiPlex 7070 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
2.5-inch hard drive assembly Removing the 2.5-inch hard drive assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side cover b. Front bezel 3. Open the front panel door. 4. To remove the hard drive assembly: a. Disconnect the hard drive data and power cables from the connectors on the 2.5-inch hard drive [1]. b. Press the blue tabs of the assembly on both sides [2] and pull the hard drive assembly out of the system [3]. Installing the 2.5-inch drive assembly 1. To install the hard drive: a. Insert the hard drive assembly into the slot on the system until it clicks into place [1] [2]. b. Connect the hard drive data and power cables to the connectors on the 2.5-inch hard drive [3]. Removing and installing components 27