Dell OptiPlex N Service Manual (.pdf) - Page 47
Stand for Vertical Orientation, Optional Stand Removal
View all Dell OptiPlex N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Stand for Vertical Orientation captive screw locator pins (2) (on underside of stand) front bezel Figure 4-1. Optional Stand Removal To remove the stand, if one is installed, follow these steps (see Figure 4-1): 1. Place the right side of the computer on a flat work surface. 2. Unscrew the captive screw using your fingers or a wide flat-blade screwdriver. 3. Pull the stand away from the computer. Disengage the locator pins that position and help secure the stand to the computer. When reinstalling the stand, align the front edge of the stand with the groove between the front bezel and the computer cover. Move the stand until the locator pins engage the holes in the side of the computer. The locator pins are keyed for correct installation. Removing and Replacing Parts 4-3