Dell OptiPlex N Service Manual (.pdf) - Page 50
Control Panel, Control Panel Removal
 |
View all Dell OptiPlex N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Control Panel mounting screw control panel cable cable retention tabs (2) chassis tabs (3) Figure 4-4. Control Panel Removal To remove the control panel, follow these steps (see Figure 4-4): 1. Remove the power supply. 2. Disconnect the control panel cable from the PANEL connector on the system board (see Figure 4-7). 3. From inside the chassis, remove the mounting screw securing the con- trol panel to the chassis. 4. Remove the control panel from the chassis. When you reinstall the control panel, place the control panel between the tabs in the chassis. Before reinstalling the power supply, be sure to route the control panel cable under the retention tabs on the chassis wall. 4-6 Dell OptiPlex N Systems Service Manual
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45 -
46 -
47 -
48 -
49 -
50 -
51 -
52 -
53 -
54 -
55 -
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
4-6
Dell OptiPlex N Systems Service Manual
C
ontrol Panel
Figure 4-4.
Control Panel Removal
To remove the control panel, follow these steps (see Figure 4-4):
1.
Remove the power supply.
2.
Disconnect the control panel cable from the PANEL connector on the
system board (see Figure 4-7).
3.
From inside the chassis, remove the mounting screw securing the con-
trol panel to the chassis.
4.
Remove the control panel from the chassis.
When you reinstall the control panel, place the control panel between the tabs in
the chassis. Before reinstalling the power supply, be sure to route the control
panel cable under the retention tabs on the chassis wall.
control panel cable
cable retention tabs (2)
mounting screw
chassis tabs (3)