Dell OptiPlex N Service Manual (.pdf) - Page 65
Table A-1., System Setup Categories, Determines whether keyboard's Num Lock - optiplex num lock
View all Dell OptiPlex N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Table A-1. System Setup Categories Category Function Time Resets time on computer's internal clock. Date Resets date on computer's internal calendar. Diskette Drive A Diskette Drive B Identifies type of diskette drives installed. Drives: Primary Secondary Identifies drives attached to the IDE1 and IDE2 connectors on system board. Each EIDE connector supports two EIDE drives (Drive 0 and Drive 1). NOTE: Although the OptiPlex N system board supports up to four EIDE devices, no devices other than the internal hard-disk drive should be connected. For EIDE hard-disk drives, the system provides an automatic drive-type detect feature. To use this feature, highlight the appropriate Drive category and type a (for automatic). If none of the supported drive types matches the parameters of the new drive, enter parameters directly. To do so, highlight the appropriate Drive category (Drive 0 or Drive 1) and type u to display User1. Press to highlight each of the parameter fields in succession, and enter the appropriate number for each field. Reserved Memory Designates a region of system board memory that can be supplied by an expansion card. This feature should not be enabled unless an expansion card that requires special addressing is installed. CPU Speed Indicates processor speed at which system boots-the processor's rated speed or a slower compatibility speed. Num Lock Determines whether keyboard's Num Lock mode is activated. Keyboard Errors Enables or disables reporting of keyboard errors during POST. System Password Displays current status of system's password security feature. Also used to assign and verify a new password. System Setup Program A-3