Dell PowerConnect 6248 Command Line Interface Guide - Page 1046

console(config-if-vlan15)#ip vrrp 5 timers advertise 10 ip vrrp track interface Use the ip vrrp track interface command to alter the priority of the VRRP router based on the availability of its interfaces. It is useful for tracking interfaces that are not configured for VRRP. Only IP interfaces are tracked. A tracked interface is up if IP on that interface is up. Otherwise, the tracked interface is down. When the tracked interface is down or the interface has been removed from the router, the priority of the VRRP router will be decremented by the value specified in priority argument. When the interface is up for IP protocol the priority will be incremented by the priority value. A VRRP configured interface can track more than one interface. When a tracked interface goes down, then the priority of the router will be decreased by 10 (default priority decrement) for each downed interface. The default priority decrement is changed using the priority argument. The default priority of the virtual router is 100, and the default decrement priority is 10. By default no interfaces are tracked. If we specify just the interface to be tracked without giving the priority, which is optional, then the default priority will be set. Use the no form of this command to remove the interface from the tracked list or to restore the priority decrement to its default. When removing an interface from the tracked list, the priority is incremented by the decrement value if that interface is down. Syntax ip vrrp vrid track interface vlan vlan-id [ decrement priority ] vrid-Virtual router identification (Range: 1-255). vlan vlan-id-Valid VLAN ID. priority-Priority decrement value for the tracked interface (Range: 1-254). Default Configuration No interfaces are tracked. 1046 Virtual Router Redundancy Protocol Commands