Dell PowerConnect 6248 Command Line Interface Guide - Page 834

• hash-mask-length - The length of a mask that is to be ANDed with the group address before the hash function is called. All groups with the same seed hash correspond to the same RP. For example, if this value is 24, only the first 24 bits of the group addresses matter. This allows you to get one RP for multiple groups. (Range 0-32 bits). • priority - The priority of the candidate BSR. The BSR with the higher priority is preferred. If the priority values are the same, the router with the higher IP address is the BSR. (Range 0-255). Default Configuration The router will not announce its candidacy by default The default hash mask length is 32 bits. The default priority is 0. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command. Example console(config)#ip pimsm bsr-candidate interface vlan 3 12 255 ip pimsm dr-priority The ip pimsm dr-priority command is used to set the priority value for which a router is elected as the designated router (DR). Use the "no" form of this command to set the priority to the default. Syntax ip pimsm dr-priority priority no ip pimsm dr-priority • priority - The election priority (Range: 0-2147483647). 834 Multicast Commands