Dell PowerConnect 6248 Command Line Interface Guide - Page 1047

The default decrement priority is 10. Command Mode Interface Configuration (VLAN) mode. User Guidelines There are no user guidelines for this command. Example The following example adds VLAN 2 to the virtual router tracked list (with a priority decrement value of 20). (config-if-vlan10)#ip vrrp 1 track interface vlan 2 decrement 20 ip vrrp track ip route Use the ip vrrp track ip route command to track the route reachability. When the tracked route is deleted, the priority of the VRRP router is decremented by the value specified in the priority argument. When the tracked route is added, the priority is incremented by the same. A VRRP configured interface can track more than one route. When a tracked route goes down, the priority of the router is decreased by 10 (default priority decrement) for each downed route. By default no routes are tracked. If we specify just the route to be tracked without giving the priority which is optional then the default priority will be set. Use the "no" form of this command to remove the route from the tracked list or to restore the priority decrement to its default. When removing a tracked ip route from the tracked list, priority should be incremented by the decrement value if the route is not reachable. Syntax ip vrrp vrid track ip route ip-address/prefix-length [ decrement priority ] vrid-Virtual router identification (Range: 1-255). ip-address/prefix-length-Specifies the route to be tracked. priority-Priority decrement value for the tracked route (Range: 1-254). Virtual Router Redundancy Protocol Commands 1047