Dell PowerConnect 6248 Command Line Interface Guide - Page 921

Area Id - The OSPF area in which the adjacency is formed Options - The options advertised by the neighbor Router Priority: The router priority advertised by the neighbor Dead timer - The number of seconds until the dead timer expires Up Time - How long this adjacency has been in FULL state State - The current state of the adjacency Events: Incremented for the following events: A DD is received from the neighbor with an MTU mismatch The neighbor sent an ACK for an LSA not on the neighbor's retransmit list The state of the adjacency changed. Retransmission Queue Length - The number of LSAs on the neighbor's retransmit queue waiting for the neighbor to acknowledge. Restart Helper Status: One of two values: • Helping - This router is acting as a helpful neighbor to this neighbor. A helpful neighbor does not report an adjacency change during graceful restart, but continues to advertise the restarting router as a FULL adjacency. A helpful neighbor continues to forward data packets to the restarting router, trusting that the restarting router's forwarding table is maintained during the restart. • Not Helping - This router is not a helpful neighbor at this time. Restart Helper Exit Reason is one of the following values: • Restart Reason - When the router is in helpful neighbor mode, the output includes the restart reason the restarting router sent in its grace LSA. The Restart Reason is the value in the Graceful Restart Reason TLV in the grace LSA sent by the restarting router. Possible values for the Restart Reason are defined in RFC 3623 as follows: - Unknown (0) - Software restart (1) - Software reload/upgrade (2) - Switch to redundant control processor (3) - Unrecognized - a value not defined in RFC 3623 OSPF Commands 921