Dell PowerConnect 6248 Command Line Interface Guide - Page 1116

Saving the Running Configuration to the Startup Configuration Use the copy running-config startup-config command to copy the running configuration to the startup configuration. Backing up the Running Configuration or Startup Configuration to the Backup Configuration Use the copy running-config backup-config command to back up the running configuration to the backup configuration file. Use the copy startupconfig backup-config command to back up the startup configuration to the backup configuration file. Copying to a Unit on the Stack Using unit The copy command can be used to copy an image to another unit. This means that a copy command allows the management node to distribute its existing code to other nodes. The command syntax is copy image unit {all | } NOTE: The copy command can accept the unit {all | } only as the destinationurl. In this case, only image can be the source-url. NOTE: The copy image unit all command does not copy the active image to the backup image on the management unit, just the stack units. The copy command cannot: • Either download code from tftp, for example, to the stack units directly, or • Copy code from one stack unit to another stack unit. For copying to all units simultaneously, use the keyword all. Example copy scp://user@serverip/PC6200v3.0.0.13.stk image Remote Password:****** delete backup-config Use the delete backup-config command in Privileged EXEC mode to delete the backup-config file. 1116 Configuration and Image File Commands