Dell PowerConnect 6248 Command Line Interface Guide - Page 194

enable authentication Use the enable authentication command in Line Configuration mode to specify the authentication method list when accessing a higher privilege level from a remote telnet or console. To return to the default specified by the enable authentication command, use the no form of this command. Syntax enable authentication {default|list-name} no enable authentication • default - Uses the default list created with the aaa authentication enable command. • list-name - Uses the indicated list created with the aaaa authentication enable command. (Range: 1-12 characters) Default Configuration Uses the default set with the command aaa authentication enable. Command Mode Line Configuration mode User Guidelines This command has no user guidelines. Example The following example specifies the default authentication method when accessing a higher privilege level console. console(config)# line console console(config-line)# enable authentication default enable password Use the enable password command in Global Configuration mode to set a local password to control access to the privileged EXEC mode. To remove the password requirement, use the no form of this command. 194 AAA Commands