Dell PowerConnect 6248 Command Line Interface Guide - Page 119

Command Description Mode* show sntp status Displays the SNTP status. PE sntp authenticate Set to require authentication for received NTP GC traffic from servers. sntp authentication-key Defines an authentication key for SNTP. GC sntp broadcast client Enables SNTP Broadcast clients. GC enable sntp client enable Enables SNTP Broadcast and Anycast clients on IC an interface. sntp client poll timer Defines polling time for the SNTP client. GC sntp server Configures the SNTP server to use SNTP to GC request and accept NTP traffic from it. sntp trusted-key Authenticates the identity of a system to which GC Simple Network Time Protocol (SNTP) will synchronize. sntp unicast client enable Enables clients to use Simple Network Time GC Protocol (SNTP) predefined Unicast clients. clock timezone hours-offset Sets the offset to Coordinated Universal Time. GC no clock timezone Resets the time zone settings. GC clock summer-time recurring Sets the summertime offset to UTC recursively GC every year. clock summer-time date Sets the summertime offset to UTC. GC no clock summer-time Resets the recurring summertime configuration. GC show clock Displays the time and date from the system PE clock. NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60. Configuration and Image Files Command boot system clear config Description Mode* Specifies the system image that the switch loads PE at startup. Restores switch to default configuration PE Command Groups 119