Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 239
write_early_ack, disable_rekey
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
cryptoCfg 2 --modify -LUN Modifies the encryption policies of one or more LUNs in a specified CTC. This command is valid only on the group leader. The following operands are required when modifying a LUN: crypto_target_container_name Specifies the name of the CTC to which the LUNs belong. LUN_Num | range Specifies the LUN number either as a 16-bit (2 bytes) number in hex notation (for example, 0x07) or as a 64-bit (8 bytes) number in WWN format (for example, 0:07:00:00:00:00:00:00). The LUN number must be zero when a tape LUN is specified and the tape drive is a single LUN device. When specifying a range, the LUN numbers must be entered in the 16-bit hex format. initiator_PWWN initiator_NWWN Specifies the initiator by its port WWN and node WWN. You may optionally modify the following LUN policy configuration parameters. Refer to cryptocfg --add -LUN for descriptions of these parameters. • [-encryption_format native | DF_compatible] • [-encrypt | cleartext] • [-enable_encexistingdata | -disable_encexistingdata] • [-enablerekey time_period | -disable_rekey] • [-write_early_ack disable | enable] • [-read_ahead disable | enable] Make sure you understand the ramifications of modifying LUN parameters (such as changing the LUN policy from encrypt to cleartext) for devices that are online and are already being utilized. The following restrictions apply when modifying LUN policy parameters: • When you change LUN policy from encrypt to cleartext the following policy parameters are restored to default (disabled): -enable_encexistingdata, -enable_rekey, and -key_lifespan. • When changing the LUN policy back to encrypt, these parameters need to be reconfigured. Attempting to reconfigure these parameters while the LUN policy is set to cleartext is not permitted and generates an error. • For tape LUNs the -enable_encexistingdata and the -enable_rekey operands are not valid and return an error when executed. • The -key_lifespan parameter cannot be modified for tape LUNs once it has been set. • Exercise caution when modifying policy parameters while tape sessions are in progress. For information on the impact of encryption policy changes while tape sessions are in progress, refer to the Fabric OS Encryption Administrator's Guide. --remove -LUN Removes a LUN from a specified CTC. You must stop all traffic to the LUN from all initiators accessing the LUN you are removing from the CTC. Failure to do so results in I/O failure between the initiators and the LUN. If the LUN is exposed with different LUN Numbers to different initiators, all exposed LUN Numbers must be removed. This command is valid only on the group leader. The following operands are required when removing a LUN from a CTC: crypto_target_container_name Specifies the name of the CTC from which the LUN is to be removed. LUN_Num Specifies the number of the LUN to be removed. Use the --show -container command for a list of LUN numbers associated with the specified CTC. Fabric OS Command Reference 211 53-1002746-01