Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 809
Mirror Port, switchshow | grep Online
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 809 highlights
portMirror 2 EXAMPLES --delete Deletes a mirror connection between a source and a destination. You must specify a SID and a DID when deleting a mirror connection. To configure a port as a mirror port: switch:admin> portcfg mirrorport 18--enable Please confirm enable of Mirror Port: 17 (Y,y,N,n): [n] y To verify that port mirroring is enabled on port 18: switch:admin> portcfgshow 18 Area Number: 18 Speed Level: AUTO(HW) Fill Word(On Active) 0(Idle-Idle) Fill Word(Current) 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port AE Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port ON (output truncated) switch:admin> switchshow | grep Online switchState: Online 1 1 640100 id N2 Online FC G-Port 2 2 640200 id N2 Online FC E-Port \ 10:00:00:05:1e:36:01:26 "sw0" (downstream) 7 7 640700 id N4 Online FC F-Port \ 20:14:00:05:1e:a2:f9:b1 8 8 640800 id N2 Online FC F-Port \ 1 N Port + 2 NPIV public 10 10 640a00 id N2 Online FC Mirror Port 11 11 640b00 id N2 Online FC F-Port \ 21:00:00:e0:8b:10:1d:9d 12 12 640c00 id N4 Online FC F-Port \ 20:15:00:05:1e:a2:f9:b1 17 17 641100 id N2 Online FC E-Port \ 10:00:00:05:1e:a2:ec:9c "sw0" (downstream) 18 18 641200 id N2 Online FC Mirror Port To add three mirror connection between three local device port pairs to mirror port 18: switch:admin> portmirror --add 18 0x640c00 0x640800 switch:admin> portmirror --add 18 0x640700 0x640b00 switch:admin> portmirror --add 18 0x640700 0x640c00 Fabric OS Command Reference 781 53-1002746-01