Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 325
enable, loginshow, fcmapset, fipcfg, advintvl, fipcfgshow, resetlogin, teport, device
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
fcoe 2 EXAMPLES --enable Enables the specified FCoE port. --loginshow Displays information about the devices logged in to the specified FCoE port. --fcmapset Configures the FCMAP values for Fabric Provided MAC Addresses (FPMA) for the specified VLANs. -vlan vid Specifies the VLAN for which to set the FCMAP. fcmapid Specifies the FCMAP to be set. --fcmapunset Unsets the FCMAP for a specified VLAN. Devices previously logged in are disconnected. -vlan vid Specifies the VLAN ID for which the FCMAP is unset. --fipcfg Configures FIP multicast advertisement intervals. -advintvl intvl Specifies the interval in seconds. The minimum interval value is 0 and the maximum value is 90. A value of 0 cancels the previous advertisement interval value. A value of 1 to 90 is valid for changing the interval. --fipcfgshow Displays FIP configurations. --resetlogin Clears the logins that occurred through a front end port or from a device specified by the Enode's VN_Port WWN. -teport [slot/]port Specifies the slot or port number. -device wwn Specifies the device WWN. To display the FCoE ports on the Brocade 8000: switch:admin> switchshow switchName: elara133 switchType: 76.6 switchState: Online switchMode: Native switchRole: Subordinate switchDomain: 133 switchId: fffc85 switchWwn: 10:00:00:05:1e:76:60:80 zoning: ON (cfg_fcoe) switchBeacon: OFF FC Router: OFF FC Router BB Fabric ID: 1 Index Port Address Media Speed State Proto 0 0 850000 id N8 Online FC E-Port 10:00:00:05:1e:92:de:00 "pluto145" (upstream)(Trunk master) 1 1 850100 id N8 Online FC E-Port Fabric OS Command Reference 297 53-1002746-01