Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 556
force, provision, lscfg --create 1 -base, lscfg --create 2
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 556 highlights
2 lsCfg EXAMPLES -b | -base -f | -force --show -ge -provision --help Turns an existing logical switch into a base switch. When this command is issued on a switch that is already a base switch, this command removes the base switch properties. This command disables the current logical switch. After making the change, you must re-enable the switch. Executes the command without confirmation. This operand is optional. Displays the partition configuration on a switch or chassis. Without any operands, the command displays all logical switches and the FC ports assigned to them. For each switch, the FID and switch role are displayed: base switch (BS) or default switch (DS). The following operands are optional with the --show option. Displays partition configuration information for GbE ports. This operand is valid only on the Brocade 7800/FX8-24 platforms. Displays the partition configuration for all slots, regardless of the slot's status. This operand is valid only on a chassis and can be used with or without the -ge option. Displays the command usage. To create a base switch: switch:admin> lscfg --create 1 -base Creation of a base switch requires that the proposed new base switch on this system be disabled. Would you like to continue [y/n]?: y About to create switch with fid=1. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. To create a logical switch identified by fabric ID 2: switch:admin> lscfg --create 2 About to create switch with fid=2. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. To create a base switch with FID 2 without confirmation: switch:admin> lscfg --create 2 -base -force About to create switch with fid=2. Please wait... Switch successfully created. Logical Switch has been created with default configurations. Please configure the Logical Switch with appropriate switch and protocol settings before activating the Logical Switch. 528 Fabric OS Command Reference 53-1002746-01