Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 645
force, perfTTmon, perfAddEEMonitor, perfResourceShow
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 645 highlights
perfTTmon 2 EXAMPLES SEE ALSO To add an F_Port Top Talker to blade 1 port 2 (which should be an F_Port): Switch:admin> perfttmon --add ingress 1/2 To delete the F_Port Top Talker: switch:admin> perfttmon --del 1/2 To add the Fabric Mode Top Talker: Switch:admin> perfttmon --add fabricmode To delete the Fabric Mode Top Talker: Switch:admin> perfttmon --del fabricmode To display the Fabric Mode Top Talker output: Switch:admin> perfttmon --show dom 1 pid Src_PID Dst_PID MB/sec Potential E-Ports 0x03f600 0x011300 121.748 2/0,2/2,2/3 0x03f600 0x011300 121.748 3/14,3/15 To identify and delete a stale Top Talker for an F_Port (the F_Port belonged to a blade that has been removed): Switch:admin> configshow -a | grep perf perf.ToptalkerEnabledonC2:1 perf.ttmonc.254:254|0|0|1: Switch:admin> perfttmon --delete -sconfig To install an ingress and an egress Top Talker monitor on the same ASIC with the -force option (in the following example, ports 1/33 and 1/34 are on the same ASIC. The attempt to install conflicting monitors fails unless you use the perfTTmon command with the-force option ): switch:admin> perfttmon --add ingress 1/33 switch:admin> perfttmon --add egress 1/34 Cannot install EE/TopTalker Egress monitor because TopTalker Ingress monitor is already present on one of the ports of this asic switch:admin> perfttmon --add egress 1/34 -force perfAddEEMonitor, perfResourceShow Fabric OS Command Reference 617 53-1002746-01