Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 663
portshow ipif, Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 663 highlights
portCfg 2 EXAMPLES -m | --mgmt Specifying this parameter applies the VLAN tag to the inband management interface. To create an IP interface using IPv4: switch:admin> portcfg ipif ge0 create \ 192.168.0.20 255.0.0.0 1500 Operation Succeeded To create an IP interface using IPv6 with a prefix: switch:admin> portcfg ipif ge0 create 2000::22/64 1500 Operation Succeeded switch:admin> portshow ipif ge0 Port: ge0 Interface IPv4 Address NetMask Effective MTU Flags 0 192.168.0.20 255.255.255.0 1500 U R M 1 192.168.0.21 255.255.255.0 1500 U R M Interface IPv6 Address Len Effective MTU Flags 2 fe80::205:1eff:fec3:e6b2 64 1500 U R M 3 2000::20 64 1500 U R M 4 2000::21 64 1500 U R M 5 2000::22 64 1500 U R M Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp To create an interface for a failover crossport on a Brocade FX8-24: 1. Configure the interface for the local XGE port (xge0). switch:admin> portcfg ipif 8/xge0 create 192.168.10.20 \ 255.255.255.0 1500 Operation Succeeded 2. Configure the interface for the nonlocal XGE port (xge1). switch:admin> portcfg ipif 8/xge1 create 192.168.11.20 \ 255.255.255.0 1500 -x Operation Succeeded 3. The IP address 192.168.11.20 will be available for circuits on VE_Ports 22-31. The output from portshow ipif for the same address shows the crossport tag. switch:admin> portshow ipif 8/xge0 Port: 8/xge0 Interface IPv4 Address NetMask Effective MTU Flags 0 192.168.10.20 255.255.255.0 1500 U R M 3 192.168.11.20 255.255.255.0 1500 U R M (crossport) To delete an IP interface: switch:admin> portcfg ipif ge0 delete 192.168.10.20 Operation Succeeded Fabric OS Command Reference 635 53-1002746-01