Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Command Reference Guid - Page 461
haFailover, haShow, Local CP Slot 7, CP1: Active, Warm Recovered
View all Dell PowerConnect Brocade M5424 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 461 highlights
haDump 2 NOTES OPERANDS EXAMPLES SEE ALSO The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. None To view information about the High Availability feature status on a Brocade DCX 8510-8: switch:admin> hadump TIME_STAMP: Mar 30 12:57:35.109173 Local CP (Slot 7, CP1): Active, Warm Recovered Remote CP (Slot 6, CP0): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized CHASSIS Ethernet IP Address: 10.20.114.57 Ethernet Subnetmask: 255.255.240.0 CP0 Ethernet IP Address: 10.20.114.58 Ethernet Subnetmask: 255.255.240.0 Host Name: cp0 Gateway IP Address: 10.20.112.1 CP1 Ethernet IP Address: 10.20.114.59 Ethernet Subnetmask: 255.255.240.0 Host Name: cp1 Gateway IP Address: 10.20.112.1 Backplane IP address of CP0 : 10.0.0.5 Backplane IP address of CP1 : 10.0.0.6 IPv6 Autoconfiguration Enabled: Yes Local IPv6 Addresses: IPv6 Gateways: TIME_STAMP: Mar 30 12:57:37.31282 == Service == chassis0:0(8.0) major: 8 part: 0 lo: 0 role: 2 id: 0 dump: 3 epoch: 3 log: 0 block: 0 bits: 321 recov: 0 index: 14 upper: 14 coldnum: 3 warmnum: 14 stbynum: 4 stat: 4 prevstat: 4 sv_winsz: 64 nscm: 10 == Config == (Output truncated) haFailover, haShow Fabric OS Command Reference 433 53-1002746-01