Dell PowerEdge 2800 Rack- to-Tower Conversion Guide - Page 12
each metal foot and pull each foot from the chassis. See
 |
View all Dell PowerEdge 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Y1001bk0.book Page 10 Thursday, July 8, 2004 4:32 PM Figure 1-2. Removing the Tower Bezel www.dell.com | support.dell.com keylock bezel 2 Remove the four metal feet from the system: a Orient the system so that the metal feet hang over the edge of the table as shown in Figure 1-3. b Using a #2 Phillips screwdriver or a 1/4-inch nut driver, remove the screw that secures each metal foot and pull each foot from the chassis. See Figure 1-3. Repeat this step for the other three metal feet. 10 Tower-to-Rack and Rack-to-Tower Conversion Guide
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
10
Tower-to-Rack and Rack-to-Tower Conversion Guide
www.dell.com | support.dell.com
Figure 1-2.
Removing the Tower Bezel
2
Remove the four metal feet from the system:
a
Orient the system so that the metal feet hang over the edge of the table as shown in
Figure 1-3.
b
Using a #2 Phillips screwdriver or a 1/4-inch nut driver, remove the screw that secures
each metal foot and pull each foot from the chassis. See Figure 1-3.
Repeat this step for the other three metal feet.
bezel
keylock
Y1001bk0.book
Page 10
Thursday, July 8, 2004
4:32 PM