Dell PowerEdge 2800 Rack- to-Tower Conversion Guide - Page 19

Y1001bk0.book Page 17 Thursday, July 8, 2004 4:32 PM Figure 1-8. Installing Shoulder Nuts shoulder nuts (6) Removing the Rack Doors You must remove the doors from the rack cabinet to provide access to the interior of the rack and to prevent damage to the doors while installing the system in the rack cabinet. See the documentation provided with the rack for instructions on removing rack doors. Installing the System in a Rack If you are installing the system in a rack cabinet, see the procedures contained in the system Rack Installation Guide. Installing the Cable-Management Arm See the procedures contained in the system Rack Installation Guide. Routing Cables See the procedures contained in the system Rack Installation Guide. Installing the Rack Bezel To install the bezel, hook the right end of the bezel onto the chassis, then fit the free end of the bezel onto the system. Secure the bezel with the keylock. See Figure 1-9. Tower-to-Rack and Rack-to-Tower Conversion Guide 17