Dell PowerEdge 2800 Rack- to-Tower Conversion Guide - Page 13
Carefully lift the cover away from the system and set it aside.
View all Dell PowerEdge 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Y1001bk0.book Page 11 Thursday, July 8, 2004 4:32 PM Figure 1-3. Removing the Metal Feet metal feet (4) hex-head Phillips screws (4) 3 Remove the system cover and set it aside (see Figure 1-4): a Loosen the two thumbscrews on the front of the system. b Slide the system cover back and grasp the cover at both ends. c Carefully lift the cover away from the system and set it aside. Tower-to-Rack and Rack-to-Tower Conversion Guide 11
Tower-to-Rack and Rack-to-Tower Conversion Guide
11
Figure 1-3.
Removing the Metal Feet
3
Remove the system cover and set it aside (see Figure 1-4):
a
Loosen the two thumbscrews on the front of the system.
b
Slide the system cover back and grasp the cover at both ends.
c
Carefully lift the cover away from the system and set it aside.
metal feet (4)
hex-head Phillips
screws (4)
Y1001bk0.book
Page 11
Thursday, July 8, 2004
4:32 PM