Dell PowerEdge 2800 Rack- to-Tower Conversion Guide - Page 23
Removing the Cable-Management Arm
![]() |
View all Dell PowerEdge 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Y1001bk0.book Page 21 Thursday, July 8, 2004 4:32 PM Removing the Cable-Management Arm 1 Shut down and turn off the system you are removing and all peripherals attached to this system. 2 At the back of the rack cabinet, disconnect and remove the AC power cable and all cables connected to the back of the system and secured to the cable-management arm with the arm's Velcro straps. 3 Loosen the two captive thumbscrews securing the cable-management arm retainer to the vertical rack rails. See Figure 1-11. 4 Disconnect the inner tab of the cable-management arm from the cable tray. 5 Disconnect the outer tab of the cable-management arm from the cable tray. 6 Pull the cable-management arm from the cable tray. 7 Remove the two captive thumbscrews that secure the cable tray to the system. See Figure 1-11. 8 Remove the cable tray. Figure 1-11. Removing the Cable-Management Arm cable-management tabs arm captive thumbscrews (2) latch on cable tray back of rack captive thumbscrews (2) Velcro strap formed metal tabs back of system Tower-to-Rack and Rack-to-Tower Conversion Guide 21
![](/manual_guide/products/dell-poweredge-2800-rack-totower-conversion-guide-fd2d367/23.png)