Dell PowerEdge 2800 Rack- to-Tower Conversion Guide - Page 26
Removing the Bezel and Cover
![]() |
View all Dell PowerEdge 2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Y1001bk0.book Page 24 Thursday, July 8, 2004 4:32 PM Figure 1-13. Installing the Tower Trim Panel and Metal Feet trim panel hex-head Phillips screws (2) www.dell.com | support.dell.com hex-head Phillips screws (2) Removing the Bezel and Cover 1 To remove the bezel, perform the following steps: a Orient the system as shown in Figure 1-14. b Unlock the keylock. See Figure 1-14. c Rotate the keylock end of the bezel away from the front panel. d Unhook the other end of the bezel and pull the bezel away from the system. 24 Tower-to-Rack and Rack-to-Tower Conversion Guide
![](/manual_guide/products/dell-poweredge-2800-rack-totower-conversion-guide-fd2d367/26.png)
24
Tower-to-Rack and Rack-to-Tower Conversion Guide
www.dell.com | support.dell.com
Figure 1-13.
Installing the Tower Trim Panel and Metal Feet
Removing the Bezel and Cover
1
To remove the bezel, perform the following steps:
a
Orient the system as shown in Figure 1-14.
b
Unlock the keylock. See Figure 1-14.
c
Rotate the keylock end of the bezel away from the front panel.
d
Unhook the other end of the bezel and pull the bezel away from the system.
trim panel
hex-head Phillips
screws (2)
hex-head Phillips
screws (2)
Y1001bk0.book
Page 24
Thursday, July 8, 2004
4:32 PM