Dell PowerEdge 6800 Installation and Troubleshooting Guide (.htm) - Page 8
Tower-to-Rack Kit Contents, Recommended Tools and Supplies, Conversion Tasks - drivers
View all Dell PowerEdge 6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
www.dell.com | support.dell.com Tower-to-Rack Kit Contents The tower-to-rack kit includes the following items (see Figure 1-1): • One rack front panel with rack handles and thumbscrews • Twenty-one 6-32 x 0.312-inch black pan-head Torx screws • Four 6-32 x 0.312-inch black flat-head Phillips screws • Six shoulder mounting screws • Replacement rack control-panel bracket An optional rack bezel, complete with keylock and keys, is available separately. Figure 1-1. Tower-To-Rack Kit Contents rack front panel rack control panel bracket shoulder mounting screws (6) 6-32 x 0.312 6-32 x 0.312 Torx Torx screws (4) screws (21) Recommended Tools and Supplies • #2 Phillips screwdriver • 1/4-inch nut driver • T-10 Torx driver (for removing and installing the front panels) • T-15 Torx driver (for removing and installing the front panels) Conversion Tasks Installing a rack kit involves performing the following tasks: • Removing the optional tower bezel, feet, and cover • Removing the control panel assembly and tower front panel • Installing the rack front panel and control panel assembly • Removing the trim panel • Installing the system in the rack • Installing the optional rack bezel 8 Tower-to-Rack Conversion Guide