Dell PowerEdge PDU Metered LCD User Manual - Page 24
To install a side stabilizer foot, perform the following steps
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Figure 1-9. Attaching the Front Stabilizer Foot 1 1 front stabilizer foot To install a side stabilizer foot, perform the following steps: 1 Remove the side panel. 2 On the side of the rack frame's bottom rail, locate the three threaded holes (see Figure 1-10). 3 Position the stabilizer foot against the base of the rack frame and align its holes with the corresponding holes in the frame. 22 Dell™ PowerEdge™ 4210 Installation Guide
![](/manual_guide/products/dell-poweredge-2410-nbsp-2707ec2/24.png)
22
Dell™ PowerEdge™ 4210 Installation Guide
Figure 1-9.
Attaching the Front Stabilizer Foot
To install a side stabilizer foot, perform the following steps:
1
Remove the side panel.
2
On the side of the rack frame’s bottom rail, locate the three threaded holes
(see Figure 1-10).
3
Position the stabilizer foot against the base of the rack frame and align its
holes with the corresponding holes in the frame.
1
front stabilizer foot
1