Dell PowerEdge PDU Metered LCD User Manual - Page 28
Removing the Door Panels From the Optional Door Kit, Coupling Two Racks
![]() |
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Removing the Door Panels From the Optional Door Kit If you purchase the optional door kit, do the following to remove the door panels: 1 Install the doors according to instructions provided in the door kit. 2 Open the rack doors and locate the panel at the top of each door. 3 One panel at a time, loosen captive screws on the bottom of the panel. 4 Grab the sides of the panel and pull up to unseat them from the door. 5 Repeat steps 3 and 4 on the other door panel. Coupling Two Racks CAUTION: Because of the size and weight of the rack cabinets, never attempt to couple two rack cabinets by yourself. 1 Unpack and set up both racks. 2 Unpack the coupling kit, shown in Figure 1-13. The contents of the rack coupling kit include: • Four gasket strips • Four hexagonal spacers • Eight Allen screws • A stamped-metal crescent wrench • A T-handle Allen wrench 26 Dell™ PowerEdge™ 4210 Installation Guide
![](/manual_guide/products/dell-poweredge-2410-nbsp-2707ec2/28.png)