Dell PowerEdge PDU Metered LCD User Manual - Page 29
Opening and Removing the Back Doors, and Removing the Side, Front Door
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Figure 1-13. Rack Coupling Kit 3 1 2 4 5 1 gasket strip (4) 3 Allen screw (8) 5 T-handle Allen wrench 2 hexagonal spacer (4) 4 stamped-metal crescent wrench 3 Remove the doors and side panels from both racks. See "Removing the Front Door," "Opening and Removing the Back Doors," and "Removing the Side Panels." 4 Place the gasket strips, with their protective backing removed, on one of the racks adjacent to the four locations where the hexagonal spacers will be inserted into the racks (see Figure 1-14). NOTE: Do not cover the square holes in the rack frame with the gasket strips. It does not matter on which rack you place the gasket strips, as long as the strips protect both racks from being scratched. Dell™ PowerEdge™ 4210 Installation Guide 27