Dell PowerEdge PDU Metered LCD User Manual - Page 31
Leveling Feet., with the provided Allen screws, as shown
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5 Install the hexagonal spacers. a Position the two racks side by side. b Adjust the leveling feet on both racks so that the racks are parallel and in the same horizontal plane. For instructions, see "Adjusting the Leveling Feet." c Install the four hexagonal spacers on the front and back of the racks with the provided Allen screws, as shown in Figure 1-14. d Use the stamped metal crescent wrench to hold each hexagonal spacer in turn and tighten the Allen screws. Dell™ PowerEdge™ 4210 Installation Guide 29
Dell™ PowerEdge™ 4210 Installation Guide
29
5
Install the hexagonal spacers.
a
Position the two racks side by side.
b
Adjust the leveling feet on both racks so that the racks are parallel and
in the same horizontal plane. For instructions, see "Adjusting the
Leveling Feet."
c
Install the four hexagonal spacers on the front and back of the racks
with the provided Allen screws, as shown in Figure 1-14.
d
Use the stamped metal crescent wrench to hold each hexagonal spacer
in turn and tighten the Allen screws.