Dell PowerEdge SC1430 Hardware Owner's Manual - Page 16
Table 1-4., Diagnostic Indicator Codes Before POST, Power, Light, Causes, Corrective Action - memory for
View all Dell PowerEdge SC1430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Table 1-4. Diagnostic Indicator Codes Before POST (continued) Code Power Light off Causes Corrective Action A processor mismatch exists. See "Troubleshooting the Microprocessors" on page 110. (blinking) Table 1-5. Diagnostic Indicator Codes During POST Code Causes Corrective Action BIOS checksum failure Ensure that all network cards and connections are functioning detected; system is in recovery properly. See "Troubleshooting Your System" on page 95. mode. If the problem persists, see "Getting Help" on page 123. Possible processor failure. See "Troubleshooting the Microprocessors" on page 110. Memory failure. See "Troubleshooting System Memory" on page 103. Possible expansion card failure. See "Troubleshooting Expansion Cards" on page 109. Possible video failure. See "Getting Help" on page 123. Diskette drive or hard drive failure. Possible USB failure. Ensure that the diskette drive and hard drives are properly connected. See "Hard Drives" on page 48 and "Diskette Drive" on page 63 for information on the drives installed in your system. See "Troubleshooting a USB Device" on page 99. No memory modules detected. See "Troubleshooting System Memory" on page 103. System board failure. See "Getting Help" on page 123. 16 About Your System