Dell PowerEdge SC1430 Hardware Owner's Manual - Page 41
Installing System Components, Recommended Tools, rist grounding stra - memory fan
View all Dell PowerEdge SC1430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Installing System Components This section describes how to install the following system components: • Front drive bezel • Hard drives • Diskette drive • Optical and tape drives • Expansion cards • SAS controller card • Microprocessor • Memory • System battery • Power supply • Cooling Fans • Chassis intrusion switch • Bezel • Front I/O panel • System board Recommended Tools You may need the following items to perform the procedures in this section: • #2 Phillips screwdriver • Long #2 Phillips screwdriver (blade at least 6 inches long) • Needle-nose pliers • Wire cutter (optional) • Small flat-blade driver • Wrist grounding strap Installing System Components 41
Installing System Components
41
Installing System Components
This section describes how to install the following system components:
•
Front drive bezel
•
Hard drives
•
Diskette drive
•
Optical and tape drives
•
Expansion cards
•
SAS controller card
•
Microprocessor
•
Memory
•
System battery
•
Power supply
•
Cooling Fans
•
Chassis intrusion switch
•
Bezel
•
Front I/O panel
•
System board
Recommended Tools
You may need the following items to perform the procedures in this section:
•
#2 Phillips screwdriver
•
Long #2 Phillips screwdriver (blade at least 6 inches long)
•
Needle-nose pliers
•
Wire cutter (optional)
•
Small flat-blade drive
r
•
W
rist grounding stra
p