Dell PowerEdge SC1430 Hardware Owner's Manual - Page 19
Single-rank DIMM - The, Alert! Processor thermal - bios update
View all Dell PowerEdge SC1430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Table 1-6. System Messages (continued) Message Causes Corrective Actions Alert! Processor thermal probe failure detected. The processor thermal probe has failed. See "Getting Help" on page 123. BIOS Update Attempt Failed! Remote BIOS update attempt failed. Retry the BIOS update. If problem persists, see "Getting Help" on page 123. CPUs with different cache sizes detected! Microprocessors with different cache sizes are installed. Ensure that all microprocessors have the same cache size and that they are properly installed. See "Microprocessor" on page 73. Decreasing available memory Faulty or improperly installed memory See "Troubleshooting System Memory" modules. on page 103. DIMM pairs must be matched in size, speed, and technology. The following DIMM pair is mismatched: DIMM x and DIMM y. Mismatched or unmatched DIMMs installed; faulty or improperly seated memory module(s). Ensure that all pairs of memory modules are of the same type and size and that they are properly installed. See "Memory" on page 76. If the problem persists, see "Troubleshooting System Memory" on page 103. DIMMs must be populated in sequential order beginning with slot 1. The following DIMM is electrically isolated: DIMM x. The specified DIMM is inaccessible to Populate 2 or 4 DIMMs sequentially the system due to its location. DIMMs beginning with slot 1. See "Memory" on must be populated in sequential order, page 76. beginning with slot 1. DIMMs should be installed in pairs. Pairs must be matched in size, speed, and technology. Mismatched or unmatched DIMMs installed; faulty or improperly seated memory module(s). The system will operate in a degraded mode with reduced ECC protection. Only memory installed in channel 0 will be accessible. Ensure that all pairs of memory modules are of the same type and size and that they are properly installed. See "Memory" on page 76. If the problem persists, see "Troubleshooting System Memory" on page 103. Dual-rank DIMM paired with Single-rank DIMM - The following DIMM/rank has been disabled by BIOS: DIMM x Rank y Mismatched DIMMs installed; faulty Ensure that all pairs of memory modules memory module(s). The system has are of the same type and size and that detected a dual-rank DIMM paired they are properly installed. See with a single-rank DIMM. The second "Memory" on page 76. If the problem rank of the dual-rank DIMM will be persists, see "Troubleshooting System disabled. Memory" on page 103. About Your System 19