Dell PowerSwitch S4128F-ON EMC SmartFabric OS10 User Guide Release 10.5.0 - Page 490

Example OS10(config)# spanning-tree mst max-age 10 Supported Releases 10.2.0E or later spanning-tree mst max-hops Configures the maximum hop count for a BPDU to travel before it is discarded. Syntax spanning-tree mst max-hops number Parameters number - Enter a maximum hop value, from 6 to 40. Default 20 Command Mode CONFIGURATION Usage Information A device receiving BPDUs waits until the max-hops value expires before discarding it. When a device receives the BPDUs, it decrements the received value of the remaining hops and uses the resulting value as remaininghops in the BPDUs. If the remaining MSTP 1333 hops reach zero, the device discards the BPDU and ages out any information that it holds for the port. The command configuration applies to all common IST (CIST) in the MST region. Example OS10(config)# spanning-tree mst max-hops 30 Supported Releases 10.2.0E or later show spanning-tree mst Displays MST configuration information. Syntax show spanning-tree mst configuration Parameters None Default Not configured Command Mode EXEC Usage Information Enable MSTl before using this command. Example OS10# show spanning-tree mst configuration Region Name: asia Revision: 0 MSTI VID 0 1,7-4093 1 2 2 3 3 4 4 5 5 6 Supported Releases 10.2.0E or later show spanning-tree msti Displays MST instance information. Syntax Parameters show spanning-tree msti [instance-number [brief | guard | virtual-interface | interface interface]] • instance-number - (Optional) Displays MST instance information, from 0 to 63. For Z9332F-ON platform, enter a MST instance value from 0 to 61. • brief - (Optional) Displays MST instance summary information. • guard - (Optional) Displays which guard is enabled and the current port state. 490 Layer 2