Dell PowerSwitch S4128F-ON EMC SmartFabric OS10 User Guide Release 10.5.0 - Page 609

Default Not configured Command Mode ROUTER-NEIGHBOR Usage Information When network neighbors inherit a template, all that are enabled on the template are also supported on the neighbors. The no version of this command disables the peer group template configuration. Example OS10(conf-router-neighbor)# inherit template zanzibar Supported Releases 10.2.0E or later listen Enables peer listening and sets the prefix range for dynamic peers. Syntax Parameters listen ip-address [limit count] • ip-address-Enter the BGP neighbor IP address. • limit count-(Optional) Enter a maximum dynamic peer count, from 1 to 4294967295. Default Not configured Command Mode ROUTER-TEMPLATE Usage Information Enables a passive peering session for listening. The no version of this command disables a passive peering session. Example OS10(conf-router-template)# listen 1.1.0.0/16 limit 4 Supported Releases 10.2.0E or later local-as Configures a local AS number for a peer. Syntax Parameters local-as as-number [no-prepend] • as-number-Enter the local AS number, from 1 to 4294967295. • no-prepend-(Optional) Enter so that local AS values are not prepended to the AS_PATH attribute. Default Disabled Command Mode ROUTER-NEIGHBOR or ROUTER-TEMPLATE Usage Information Facilitates the BGP network migration operation and allows you to maintain existing AS numbers. The no version of this command resets the value to the default. The no local-as command deletes the local-as configuration. Example (Neighbor) OS10(conf-router-bgp-10)# neighbor lunar OS10(conf-router-neighbor)# local-as 20 Example (Template) OS10(conf-router-bgp-10)# template solar OS10(conf-router-template)# local-as 20 Example (Replace AS) OS10(conf-router-bgp-10)# neighbor SJC OS10(conf-router-template)# local-as 20 no-prepend replace-as Supported Releases 10.3.0E or later Layer 3 609