Dell Precision 400 Service Manual (.pdf) - Page 53
Removing and Replacing Parts in the Midsize Chassi..., Recommended Tools
![]() |
View all Dell Precision 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 4 Removing and Replacing Parts in the Midsize Chassis This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell WorkStation 400 midsize systems. If you are servicing a Dell WorkStation 400 mini tower system, use Chapter 5, "Removing and Replacing Parts in the Mini Tower Chassis." Unless otherwise noted, each procedure assumes the following: • You have performed the steps in "Precautionary Measures" found later in this chapter. • You have removed the computer cover. • You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. Recommended Tools Most of the procedures in this chapter require the use of one or more of the following tools: • Small flat-blade screwdriver • Wide flat-blade screwdriver • #1 and #2 Phillips-head screwdrivers • 1/4-inch nutdriver • Tweezers or long-nose pliers Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts in the Midsize Chassis 4-1
![](/manual_guide/products/dell-precision-400-service-manual-pdf-5d861a1/53.png)