Dell Precision 400 Service Manual (.pdf) - Page 71
Riser Board, Riser Board Removal
View all Dell Precision 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Riser Board riser board mounting screws (2) slots (2) riser board expansion-card cage Figure 4-19. Riser Board Removal To remove the riser board, follow these steps: 1. Remove the expansion-card cage and all expansion cards. 2. Place the expansion-card cage on a flat work surface with the riser board facing up. 3. Remove the two riser-board mounting screws. 4. Slide the riser board over (as shown by the arrow in Figure 4-19) until it stops; then lift the riser board away from the expansion-card cage. Removing and Replacing Parts in the Midsize Chassis 4-19
Removing and Replacing Parts in the Midsize Chassis
4-19
Riser Board
Figure 4-19.
Riser Board Removal
To remove the riser board, follow these steps:
1.
Remove the expansion-card cage and all expansion cards.
2.
Place the expansion-card cage on a flat work surface with the riser
board facing up.
3.
Remove the two riser-board mounting screws.
4.
Slide the riser board over (as shown by the arrow in Figure 4-19) until
it stops; then lift the riser board away from the expansion-card cage.
riser board
expansion-card
cage
slots (2)
riser board mounting
screws (2)