Dell Precision 400 Service Manual (.pdf) - Page 90
Inch Drive Removal
![]() |
View all Dell Precision 400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
3. Remove the four screws attaching the 5.25-inch drive to the mounting plate, and lift the drive out of the mounting plate (see Figure 5-12). retaining tabs (2) screws (4) Figure 5-12. 5.25-Inch Drive Removal When you replace the 5.25-inch drive, align the front of the drive flush with the tabs at the front of the mounting plate. Insert the four screws, and tighten them in the order stamped on the bottom of the 5.25-inch drive-mounting plate. 5-14 Dell WorkStation 400 Systems Service Manual
![](/manual_guide/products/dell-precision-400-service-manual-pdf-5d861a1/90.png)
5-14
Dell WorkStation 400 Systems Service Manual
3.
Remove the four screws attaching the 5.25-inch drive to the mounting
plate, and lift the drive out of the mounting plate (see Figure 5-12).
Figure 5-12.
5.25-Inch Drive Removal
When you replace the 5.25-inch drive, align the front of the drive flush with the
tabs at the front of the mounting plate. Insert the four screws, and tighten them
in the order stamped on the bottom of the 5.25-inch drive-mounting plate.
screws (4)
retaining tabs (2)