Dell S3048-ON VxFlex Network Deployment Guide using EMC Networking 25GbE switc - Page 11
Network connectivity
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
3.2 MGMT Switch S3048-ON S5248F-ON (Leaf1A) S5248F-ON (Leaf1B) iDRAC VxFlex-1 iDRAC VxFlex-2 iDRAC VxFlex-3 iDRAC VxFlex-4 Management network for a single rack 1GbE to Leaf OOB ports 1GbE to iDRAC ports VLTi Network connectivity Figure 7 shows one VxFlex node (VxFlex-1) connected to two leaf switches using two Mellanox ConnectX-4 LX PCIe cards that are installed in PCIe slots 1 and 2. The leaf switches are Virtual Link Trunking (VLT) peers. One port from each PCIe card connects to each leaf switch. The connections for VxFlex-2 through VxFlex-4 (not shown) are done in the same manner. 11 VxFlex Network Deployment Guide using Dell EMC Networking 25GbE switches and OS10EE
11
VxFlex Network Deployment Guide using Dell EMC Networking 25GbE switches and OS10EE
1GbE to Leaf OOB ports
MGMT Switch
iDRAC
iDRAC
iDRAC
iDRAC
S3048-ON
VxFlex-1
VxFlex-2
VxFlex-3
VxFlex-4
S5248F-ON
S5248F-ON
(Leaf1A)
(Leaf1B)
1GbE to iDRAC ports
VLTi
Management network for a single rack
3.2
Network connectivity
Figure 7 shows one VxFlex node (VxFlex-1) connected to two leaf switches using two Mellanox ConnectX-4
LX PCIe cards that are installed in PCIe slots 1 and 2. The leaf switches are Virtual Link Trunking (VLT)
peers. One port from each PCIe card connects to each leaf switch. The connections for VxFlex-2 through
VxFlex-4 (not shown) are done in the same manner.