Dell S4148U-ON EMC Networking OS10EE FCoE Deployment with FSB - Page 20

Note: Configuration of the spine switches are not detailed in this document. For information about the leafspine architecture and detailed configuration, see Dell EMC Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10EE. 5.2.9 Configure BGP routing The example configuration use of BGP is for the application traffic that is associated with the layer 3 leafspine network. Other routing protocols can be used and will not affect the FC storage configuration. S5248-Leaf1 route-map spine-leaf permit 10 match ip address prefix-list spineleaf ip prefix-list spine-leaf seq 10 permit 10.0.0.0/8 ge 24 ip prefix-list spine-leaf seq 20 permit 172.16.0.0/16 ge 24 router bgp 64703 bestpath as-path multipath-relax maximum-paths ebgp 2 address-family ipv4 unicast redistribute connected route-map spine-leaf exit graceful-restart role receiver-only template spine-leaf fall-over advertisement-interval 1 timers 3 9 exit neighbor 192.168.1.4 remote-as 64601 inherit template spine-leaf no shutdown exit neighbor 192.168.2.4 remote-as 64602 inherit template spine-leaf no shutdown S5248-Leaf2 route-map spine-leaf permit 10 match ip address prefix-list spineleaf ip prefix-list spine-leaf seq 10 permit 10.0.0.0/8 ge 24 ip prefix-list spine-leaf seq 20 permit 172.16.0.0/16 ge 24 router bgp 64702 bestpath as-path multipath-relax maximum-paths ebgp 2 address-family ipv4 unicast redistribute connected route-map spine-leaf exit graceful-restart role receiver-only template spine-leaf fall-over advertisement-interval 1 timers 3 9 exit neighbor 192.168.1.2 remote-as 64601 inherit template spine-leaf no shutdown exit neighbor 192.168.2.2 remote-as 64602 inherit template spine-leaf no shutdown 20 Dell EMC Networking OS10EE FCoE Deployment with FSB