Dell Studio XPS 13 Owner's Manual (PDF) - Page 30
Replacing the Heat Sink, Postrequisites
UPC - 883685979287
View all Dell Studio XPS 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Replacing the Heat Sink NOTE: The original thermal grease can be reused, if the original system board and heat sink are reinstalled together. If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. 1 Clean the thermal grease from the bottom of the heat sink and reapply it. 2 Align the screw holes on the heat sink with the screw holes on the system board. 3 In sequential order (indicated on the heat sink), replace the screws that secure the heat sink to the system board. Postrequisites 1 Replace the battery. See "Replacing the Battery" on page 18. 2 Replace the power-light board. See "Replacing the Power-Light Board" on page 16. 3 Replace the base cover. See "Replacing the Base Cover" on page 14. 4 Follow the instructions in "After Working Inside Your Computer" on page 11. 30 Heat Sink