Dell Studio XPS 13 Owner's Manual (PDF) - Page 49

Coin-Cell Battery, Prerequisites

Page 49 highlights

14 Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: The battery may explode if installed incorrectly. Replace the battery only with the same or equivalent type. Discard used batteries according to the manufacturer's instructions. Prerequisites 1 Remove the base cover. See "Removing the Base Cover" on page 13. 2 Remove the power-light board. See "Removing the Power-Light Board" on page 15. 3 Remove the battery. See "Removing the Battery" on page 17. 4 Remove the Mini-Card. See "Removing the Mini-Card" on page 24. 5 Remove the solid-state drive. See "Removing the Solid-State Drive" on page 27. 6 Remove the heat sink. See "Removing the Heat Sink" on page 29. 7 Remove the fan. See "Removing the Fan" on page 31. 8 Remove the system board. See "Removing the System Board" on page 44. Coin-Cell Battery 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Coin-Cell Battery
49
14
Coin-Cell Battery
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
WARNING:
The battery may explode if installed incorrectly. Replace the battery
only with the same or equivalent type. Discard used batteries according to the
manufacturer’s instructions.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 13.
2
Remove the power-light board.
See "Removing the Power-Light Board" on page 15.
3
Remove the battery. See "Removing the Battery" on page 17.
4
Remove the Mini-Card. See "Removing the Mini-Card" on page 24.
5
Remove the solid-state drive.
See "Removing the Solid-State Drive" on page 27.
6
Remove the heat sink. See "Removing the Heat Sink" on page 29.
7
Remove the fan. See "Removing the Fan" on page 31.
8
Remove the system board. See "Removing the System Board" on page 44.