Dell Studio XPS 13 Owner's Manual (PDF) - Page 35
Power-Adapter Connector, Prerequisites, Removing the Power-Adapter Connector
UPC - 883685979287
View all Dell Studio XPS 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
11 Power-Adapter Connector WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1 Remove the base cover. See "Removing the Base Cover" on page 13. 2 Remove the power-light board. See "Removing the Power-Light Board" on page 15. 3 Remove the battery. See "Removing the Battery" on page 17. 4 Remove the speakers. See "Removing the Speakers" on page 19. Removing the Power-Adapter Connector 1 Disconnect the mini-card cables from the connectors on the mini-card. 2 Lift the connector latch and pull the pull-tab to disconnect the touchpad cable from the connector on the system board. 3 Release the mini-card cables from the routing guides. Power-Adapter Connector 35