Dell Studio XPS 13 Owner's Manual (PDF) - Page 44
Removing the System Board - keyboard
UPC - 883685979287
View all Dell Studio XPS 13 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removing the System Board NOTE: Your computer's service tag is stored in the system board. You must enter the service tag in the BIOS after you replace the system-board assembly. NOTE: Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect them correctly after you replace the system-board assembly. 1 Disconnect the display cable from the connector on the system board. 2 Lift the connector latch and pull the pull-tab to disconnect the touchpad cable and keyboard-backlight cable from the connectors on the system board. 1 2 1 touchpad cable 3 display cable 3 2 keyboard-backlight cable 44 System Board
44
System Board
Removing the System Board
NOTE:
Your computer’s service tag is stored in the system board. You must enter
the service tag in the BIOS after you replace the system-board assembly.
NOTE:
Before disconnecting the cables from the system board, note the location of
the connectors so that you can reconnect them correctly after you replace the
system-board assembly.
1
Disconnect the display cable from the connector on the system board.
2
Lift the connector latch and pull the pull-tab to disconnect the
touchpad cable and keyboard-backlight cable from the connectors on
the system board.
1
touchpad cable
2
keyboard-backlight cable
3
display cable
1
2
3