Dell U2723QE Monitor Users Guide - Page 26
Standby Mode. On in Standby Mode, if the USB cable A to C or C to C is
View all Dell U2723QE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Universal Serial Bus (USB) This section gives you information about the USB ports available on your monitor. NOTE: Up to 2A on USB downstream port (port with battery icon) with BC 1.2 compliance devices; up to 0.9A on the other USB downstream ports; Up to 3A on USB-C downstream port (port with icon) with 5V / 3A compliance devices. Your monitor has the following USB ports: • 2 upstream - at rear. • 6 downstream - 4 at rear, 2 at quick access. Power Charging Port - the ports with battery icon supports fast current charging capability if the device is BC 1.2 compatible. The USB-C downstream port with icon supports fast current charging capability if the device is 5V / 3A compatible. NOTE: The monitor's USB ports work only when the monitor is on or in Standby Mode. On in Standby Mode, if the USB cable (A to C or C to C) is plugged in, the USB ports can work normally. Otherwise, follow the OSD setting of Other USB Charging, if the setting is "On in Standby Mode" then USB work normally, otherwise USB is disabled. If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality. Super speed USB 10 Gbps (USB 3.2 Gen2) Device Transfer speed Data rate Maximum power consumption (each port) Super speed+ 10 Gbps 4.5 W Super speed 5 Gbps 4.5 W Hi-Speed * 480 Mbps 4.5 W Full speed * 12 Mbps 4.5 W * Device speed when High Resolution is selected. 26 | About Your Monitor