Dell Vostro 230s Service Manual - Slim Tower - Page 4
LAN Boot ROM - power supply
View all Dell Vostro 230s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Integrated Peripherals Configuration l DVMT Mode (default) l UMA Mode DVMT/FIXED Memory - Allows you to set the size of the DVMT/FIXED Memory. Available Settings are: l 128 MB l 256 MB (default) l Maximum DVMT ATA/IDE Configuration - l Disabled l Compatible l PEG/PCI (default) USB Functions - l Enabled (default) l Disabled USB Storage Functions - l Enabled (default) l Disabled Audio Controller - l Enabled (default) l Disabled Integrated NIC - l Enabled (default) l Disabled LAN Boot ROM - l Enabled (default) l Disabled Serial Port Address - l 3F8/IRQ4 (default) l 2F8/IRQ3 l 3E8/IRQ4 l 2E8/IRQ3 Bootup Num-Lock - l On (default) l Off Quick Boot - l Enabled (default) l Disabled Power Low Power Mode Enables or disables low power mode. This option is disabled by default. When low power mode is enabled, the integrated network card is disabled when the computer shuts down or hibernates. Only add-in network cards will be able to remotely wake the computer. Suspend mode Sets the energy-saving mode of the ACPI function. It determines the Standby mode in the operating system. Available settings are: l S1 (POS) l S3 (STR) (default) USB Wakeup From S3 When you select S1 (POS) mode, the power does not shut off and the supply status remains as it is. But when you select S3 (STR) mode, the power is cut off after a delay. The computer's status before it enters STR is saved in memory, and the computer can quickly return to that previous status when the STR function wakes. Allows the system to wake up from USB peripheral that supports wake from USB. Available settings are: l Enabled (default) l Disabled Restore on AC Power Loss Determines what action the computer will take when power is restored. Available settings are: l Last State l On l Off (default) Resume by PS2 Allows the computer to resume back after go to standby using PS2 Devices. Available settings are: