Dell Vostro 5502 Service Manual - Page 12
Disassembly and reassembly, Recommended tools, Screw list
![]() |
View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
3 Disassembly and reassembly Topics: • Recommended tools • Screw list • Base cover • Battery • Memory modules • Solid-state drive • Coin-cell battery • WLAN card • Speakers • Heat sink • System fan • I/O board • System board • DC-in port • Power button with fingerprint reader (optional) • Touchpad • Display assembly • Palm-rest and keyboard assembly Recommended tools The procedures in this document may require the following tools: ● Phillips #0 screwdriver ● Phillips #1 screwdriver ● Plastic scribe (recommended for field technicians) NOTE: The #0 screw driver is for screws 0-1, and the #1 screw driver is for screws 2-4. Screw list NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced. NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component. NOTE: Screw color may vary with the configuration ordered. Table 1. Screw list Component Base cover Screw type M2x8 - captive M2x4 Quantity 2 7 Screw image 12 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5502-service-manual-1b04184/12.png)