Dell Vostro 5502 Service Manual - Page 60

Palm-rest and keyboard assembly

Get Dell Vostro 5502 PDF manuals and user guides View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Steps 1. Place the display assembly on a clean and flat surface. 2. Align and place the palm-rest and keyboard assembly on the display assembly. 3. Using the alignment posts, close the display hinges. 4. Replace the three screws (M2.5x3.5) that secure the left-display hinge to the system board. 5. Replace the three screws (M2.5x3.5) that secure the right-display hinge to the system board. 6. Connect the display cable on to the connector on the system board and adhere the tape to the system board. Next steps 1. Install the WLAN card. 2. Install the battery. 3. Install the base cover. 4. Follow the procedure in after working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the WLAN card. 60 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
Steps
1.
Place the display assembly on a clean and flat surface.
2.
Align and place the palm-rest and keyboard assembly on the display assembly.
3.
Using the alignment posts, close the display hinges.
4.
Replace the three screws (M2.5x3.5) that secure the left-display hinge to the system board.
5.
Replace the three screws (M2.5x3.5) that secure the right-display hinge to the system board.
6.
Connect the display cable on to the connector on the system board and adhere the tape to the system board.
Next steps
1.
Install the
WLAN card
.
2.
Install the
battery
.
3.
Install the
base cover
.
4.
Follow the procedure in
after working inside your computer
.
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
4.
Remove the
WLAN card
.
60
Disassembly and reassembly