Dell Vostro 5502 Service Manual - Page 23
Removing the M.2 2230 solid-state drive - SSD-1, About this task, Steps, Next steps, Prerequisites
![]() |
View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel Optane memory H10 with solid state storage. NOTE: If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the other M.2 slot. However, you may need a solid-state drive bracket (sold separately) to install the additional solid-state drive. About this task The figure indicates the location of the solid-state drive bracket and provides a visual representation of the bracket alignment procedure to accommodate the M.2 2280 solid-state drive from slot one. Steps 1. Align the solid-state drive bracket to accommodate the M.2 2280 solid-state drive. 2. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly. Next steps 1. Connect the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2230 solid-state drive - SSD-1 Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery. NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state drive in M.2 slot one. NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel Optane memory H10 with solid state storage. Disassembly and reassembly 23
![](/manual_guide/products/dell-vostro-5502-service-manual-1b04184/23.png)