Dell Vostro 5502 Service Manual - Page 28
Removing the M.2 2230 solid-state drive - SSD-2
View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Steps 1. Align the support bracket to accommodate the M.2 2280 solid-state drive. 2. Gently slide the solid-state drive into the solid-state drive slot on the system board. 3. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly. Next steps 1. Connect the battery. 2. Install the base cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2230 solid-state drive - SSD-2 Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery. NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state drive in M.2 slot one. NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel Optane memory H10 with solid state storage. About this task The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure from SSD slot two: 28 Disassembly and reassembly