Dell Vostro 5502 Service Manual - Page 22
Solid-state drive, Removing the M.2 2280 solid-state drive - SSD-1
![]() |
View all Dell Vostro 5502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3. Follow the procedure in after working inside your computer. Solid-state drive Removing the M.2 2280 solid-state drive - SSD-1 Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the base cover. 3. Disconnect the battery. NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state drive in M.2 slot one. NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel Optane memory H10 with solid state storage. About this task The figure indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure from slot one. Steps 1. Remove the single screw (M2x3) that secures the solid-state drive to the palm-rest and keyboard assembly. 2. Slide and remove the solid-state drive module from the solid-state drive slot on the system board. Installing the M.2 2280 solid-state drive - SSD-1 Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state drive in M.2 slot one. 22 Disassembly and reassembly
![](/manual_guide/products/dell-vostro-5502-service-manual-1b04184/22.png)